Digigram VX442, Руководство пользователя

Страница: 7 / 54

VX442
User’s Manual
7
HARDWARE INSTALLATION
Turn off the computer and disconnect its power cord. Open the computer and
position it so that you may easily access its PCI slots. Smoothly insert the card
into a free PCI slot. Press it down to position it firmly. Tighten the screw,
close the computer, connect the power cord and start the computer.
SOFTWARE INSTALLATION
The following section describes the VX442 installation procedure under the
various operating systems. You may check www.digigram.com for updates.
Installing the VX442 driver for MacOS 9.x
The VX442 drivers for the Macintosh are separated into a series of files, which
need to be copied to the proper places on the hard drive.
•
On your drivers CD disk, open the VX442 folder and double-click
on the Installer program.
•
The Installer will automatically place the VX442 extension in
<System Folder> <Extensions>, the VX442 Panel in <System Folder>
<Control panels> and create a VX442 ASIO folder on the desktop.
•
If you work with a music program that uses ASIO drivers, it will
also have an ASIO folder within the application’s folder. In the
VX442 ASIO folder on the desktop you will find two VX442 ASIO
drivers. For Cubase versions 4.x and higher, use the
“
VX442 ASIO2 ” driver. For earlier versions of Cubase or for any
music program that is not ASIO2 capable, use the “ VX442 ASIO ”
driver instead (check your program’s documentation). Place the file
“
VX442 ASIO ” in your program's ASIO folder by clicking on it and
dragging it to the ASIO folder.
•
You can run the VX442 control panel from any place that's
convenient, though music software applications that use ASIO will
allow you to launch the VX442 panel from within the program.
•
With the VX442 PCI card installed, restarting the computer will
load the VX442 extension.