VX222e-S user manual
Removing the driver under Windows XP and Windows Server 2003
●
Open the Windows Control Panel and double-click on the
Add/Remove Software
icon.
●
Select
Digigram HR Runtime …
, and
Change/Remove
.
●
Select
Remove
in the
“HR Runtime”
window.
●
Follow the instructions to finish the driver removal.
Removing the driver under Windows Vista, Windows Server 2008, and following versions
●
Open the
Windows Control Panel
and double-click on the
Programs and Features
icon.
●
Select
“
Digigram HR Runtime for Vista…”
, and
Change/Remove
.
●
Select
Remove
in the HR Runtime window.
●
Follow the instructions to finish removing the driver.
How to check the installation
Once the cards and the driver have been installed according to the procedure described in this manual, you can verify that the
card is properly installed and works fine as follows:
●
Menu
<Start> <Settings> <Control panel>
,
<Sound and Multimedia>
, tab
“Audio”
,
Default device
(Playback device,
Recording device). The card’s channels can be selected. The card can be used with any
DirectSound
application.
●
The card is also visible via the np interface: go to
<Start> <Programs> <Digigram>
and select
<Digigram Control
Center>
.
●
In the
“Digigram drivers”
window, select the ‘
General Information’
tab.
In the
“Modules Information”
window, you can see the
HR Runtime
modules that have been installed, and their
versions.
●
In the
“Digigram drivers”
window, select the
‘Diagnostics’
tab.
You should see here the icons of the cards you have installed.
