PCX442HR, PCX442e, PCX422HR, PCX422e, PCX440HR, PCX440e
User Manual
11
To launch the ASIO control panel, go to <Start>, <Programs>, <Digigram>,
<Digigram ASIO HE Settings>.
It allows to:
•
set/modify the size of ASIO buffers (and thus latency)
•
select the number of bits per sample (16 or 24)
•
select the LTC frame rate
•
select the I/O used
•
enable/disable the hardware monitoring control
For more information on this ASIO control panel, to refer to its online help.
Parameterizing the Wave driver
In the case of an application managing exclusively PCM audio, the latency of the
Wave driver can be optimized activating the option “PCM only” in the
Digigram control panel (CPL). With this option enabled, the latency of the
Wave driver is optimized (in this case the PCX HR on-board MPEG
