Digiflex RF159, Руководство по установке для специалистов

Страница: 4 / 8

Page

4 P/N: RF159IRG Rev 1.3 E&OE Copyright © 2020
Learning Keyfobs
A total of 250 keyfobs can be learnt, for example you can have 250 different keyfobs operating RLY1 or RLY2. You
can also spread the 250 keyfobs across both RLY1 and RLY2 using different buttons. The same keyfob can not be
programmed to operate the same relay using 2 different buttons. If a keyfob button is already learnt to RLY1 and you
learn a different button on the same Keyfob to RLY1 then the original button is overwritten by thew new button.
While learning keyfob buttons to the relays you can easily learn one keyfob to RLY1 then learn a different button to
RLY2 after each other and then learn new keyfobs after each other.
Learning a Keyfob
Action Steps LED’s -
1
Enter Keyfob
Learn Mode
Press RLY1 and RLY2
for 1 second
RX: ON
PGM: ON
RLY1: Flash
RLY2: Flash
PGM RLY1 RLY2
RF
2
Selecting The
Relay
Press Relay Button To
Select ( E.g. RLY1 )
RX ON
PGM ON
RLY1: ON
RLY2: OFF
PGM RLY1 RLY2
RF
3
Learn Keyfob
Button to Relay
Press desired keyfob
button to learn
RX: Acknowledged with a singal
pulse
PGM: ON
RLY1: Flash
RLY2: Flash
PGM RLY1 RLY2
RF
To program another keyfob or button go to step 2.
4
Exit Programming
Mode
Press RLY1 and
RLY2 for 1 second or
timeout after
60 seconds
RX: ON
PGM: OFF
RLY1: OFF
RLY2: OFF
PGM RLY1 RLY2
RF
LED Legend
Fast Flash
Red
Slow Flash
Red
Steady On
Red
Steady
Green
OFF
Table 2: RF159 Keyfob Programming
Receiver LED Indicators
The RF159 2 Way Output Module includes RED and GREEN LED indicators which provide visual feedback during sys-
tem operation. See Table 3 for information on the indicator colours and meanings.
LED Indicators
Lable LED Colour Purpose Meaning
RLY1 Red
RLY1 Operation /
Programing
In programming mode with either a 50/50 blink or solid
on as well as flashes on when the relay is operated.
RLY2 Red
RLY2 Operation /
Programing
In programming mode with either a 50/50 blink or solid
on as well as flashes on when the relay is operated.
RF Green
Packet Receive /
Transmit / Power
Indicates power on the module and receive/transmit
data packets.
PGM Red Programing Mode
Blinks each time the system is polled by the control
panel.
Table 3: RF159 Device LED’s