For instance, if you would like to set up RAID5, the dip switch should be
High/Low/High as below.
6.
Simultaneously press
"reset button”
and
“power button”
until there is a
beep sound. When DIGIARRAY powers on with a beep sound, the RAID
configuration is done.
Note:
User can use the paper clip in the accessory box to press the
reset button.
Connect DIGIARRAY to DIGIEVER NVR
Please connect your DIGIARRAY to a DIGIEVER NVR via
eSATA cable.
DIGIARRAY is equipped with an
eSATA hook
to fix eSATA cable in order to
prevent loosing eSATA cable.
2
