manualshive.com logo in svg

DigiDesign Digi 002, Начало работы

Поделиться
Скачать
DigiDesign Digi 002 Скачать руководство пользователя страница 130

Getting Started with Digi 002 & Digi 002 Rack

122

What are the Limitations of 
the Digidesign CoreAudio 
Driver?

The Digidesign CoreAudio Driver has the fol-
lowing limitations:

◆

Pro Tools is not a CoreAudio application and 

therefore requires exclusive access to Digidesign 
hardware. You cannot use CoreAudio applica-
tions and Pro Tools at the same time. To use 
Pro Tools, make sure you quit any CoreAudio 
applications before starting Pro Tools. To use a 
CoreAudio application, make sure you quit 
Pro Tools before starting any CoreAudio appli-
cation.

◆

The Digidesign CoreAudio Driver cannot be 

used to preview sound files from the Finder. 
When a sound file is located in the Mac OS X 
navigation window, a QuickTime transport bar 
is displayed next to it. The QuickTime transport 
bar lets you audition the sound file. The sound 
will always play back though the Macintosh’s 
built-in audio controller (through the Macin-
tosh’s speaker or headphone jack). However, if 
you double-click a sound file, the QuickTime ap-
plication will launch, and can use the Digi-
design CoreAudio Driver for playback. 

◆

The Digidesign CoreAudio Driver cannot be 

used for playback of System Sounds.

Compatibility

This version of Digidesign CoreAudio Driver can 
be used on Digidesign-qualified Pro Tools sys-
tems running on Macintosh, or it can be used as 
a stand-alone driver on Digidesign-qualified 
Macintosh systems that do not have Pro Tools 
installed.

Compatible Software

For a list of CoreAudio Driver-compatible soft-
ware, refer to the Digidesign Web site 
(www.digidesign.com/compato).

Digidesign can only assure compatibility and 
provide support for hardware and software it 
has tested and approved. 

For a list of Digidesign hardware systems, Digi-
design-qualified computers, operating systems, 
and devices, and Digidesign-qualified third-
party CoreAudio-compatible applications, refer 
to the compatibility page of the Digidesign Web 
site (www.digidesign.com/compato).

Installing the Digidesign 
CoreAudio Driver

The CoreAudio Driver is installed by default 
when you install Pro Tools. 

Stand-Alone CoreAudio Driver Installer

This version of Digidesign CoreAudio Driver can 
be installed on Digidesign-qualified Pro Tools 
systems running on Macintosh (for example, if 
the CoreAudio Driver was uninstalled), or it can 
be installed as a stand-alone driver on Macin-
tosh systems that do not have Pro Tools in-
stalled.

For detailed information on installing and 
configuring CoreAudio Driver on systems 
with or without Pro Tools, see the electronic 
pdf of the CoreAudio Usage Guide.

Содержание Digi 002


























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды