DigiDesign Bomb Factory, Руководство пользователя

Страница: 47 / 84

Chapter 11: Pultec Plug-ins 41
chapter 11
Pultec Plug-ins
(TDM, RTAS, and AudioSuite)
This chapter describes the following Pultec EQ
plug-ins:
• Pultec EQP-1A (see “Pultec EQP-1A” on
page 41)
• Pultec EQH-2 (see “Pultec EQH-2” on
page 42)
• Pultec MEQ-5 (see “Pultec MEQ-5” on
page 43)
Pultec EQP-1A
(TDM, RTAS, and AudioSuite)
The Pultec EQP-1A provides smooth, sweet EQ
and an extremely high quality tube audio signal
path. Use it on individual tracks, critical vocals,
or even across a stereo mix for mastering appli-
cations.
How Pultec EQP-1A Works
Built in the early 1960s, The Pultec EQP-1A of-
fers gentle shelving program equalization on
bass and highs, and offers a variable bandwidth
peak boost control. A custom (and secret) filter
network provides all its equalization functional-
ity. Quality transformers interface it to real-
world studio equipment. And a clean and well-
designed tube amplifier provides a fixed amount
of make-up gain.
How Pultec EQP-1A is Used
Low Frequency Section
Adjust low frequencies using the Boost and At-
ten knobs and the Low Frequency switch, lo-
cated at the left side of the unit. All low-fre-
quency equalization is a gentle shelving type,
6 dB per octave.
High Frequency Boost Section
Boost mid and high frequencies using the Band-
width and Boost knobs and the High Frequency
switch.
High Frequency Attenuate Section
Cut high frequencies using the Atten knob and
the Atten Sel switch located at the right side of
the plug-in.
Pultec EQP-1A