16
6.4 Control board
CATRAX Clip's
control board was designed to meet most technologies of access
control terminals in the market. The controller have mechanical features and layout
perfectly suited for the
needs and it is one of the best options for the
CATRAX Clip's
equipment's operation.
The following images show the control board with its straps, connectors, and
dipswitch, as well as the location of the power supply and the control board.
The table below describes the functions of the control board's connectors:
plus
Cn1
Cn2
Ds1
Cn8
clip
Signal
Name/Description
CN1
INPUTS
1
2
3
4
5
6
7
8
9
10
11
12
(+) vext1 (enables turn through voltage)
HAB1 (from right to left)
GND
Vext2 (enables turn through voltage)
HAB2 (enables turn through dry contact – from left to right)
GND
(+) 12Vcc (available to auxiliary – maximum 500 mA)
CLOCK1 (input for reader from left to right)
DATA1 (input for reader from left to right)
CLOCK2 (input for reader from right to left)
DATA2 (input for reader from right to left)
GND
CN2
1
2
3
4
5
6
7
8
9
10
11
12
OUTPUTS
NO or NC Contact (HAB1 return)
Contact C (HAB1 return)
NO or NC Contact (HAB2 return)
Contact C (HAB2 return)
Output for indicative X (open collector NPN – maximum 500 mA) orange wire
Output for arrow > (open collector NPN – maximum 500 mA) blue wire
Output for arrow < (open collector NPN – maximum 500 mA) green wire
(+) 24Vcc (indicative arrows’ power) red wire
GND (indicative arrows’ power) black wire
(+) solenoid of badge collector box
(-)solenoid of badge collector box
Sound signal (open collector – NPN)
CN3
1
2
3
POWER – POWER INPUT
Power input +12Vca
Power input GND
GND
