Digicom Tiziano 56 Memory, Руководство пользователя

Страница: 25 / 33

TIZIANO 56 MEMORY
Modem AT Command Set
3.13
3.4. S REGISTERS
REG. RANGE UNIT DEF. DESCRIPTION SAVED
S0 0,2-5 Ring 0 Ring to answer on
l
S1 0-255 Ring 0 Ring count
S2 0-255 ASCII 43 Escape character
l
S3 0-127 ASCII 13 Carriage return character
S4 0-127 ASCII 10 Line Feed character
S5 0-127 ASCII 8 Back Space character
S6 3-10 1 sec. 4 Wait for dial tone
l
S7 0-90 1 sec. 60 Wait for data carrier
l
S8 0-255 1 sec. 2 Pause time for “,” character
l
S9 0-255 100ms 6 Answer tone detection time
l
S10 0-255 100ms 14 Lost carrier to hang up delay
l
S12 0-255 20ms 50 Escape sequence code guard
l
S18 0-255 1 sec. 0 Test timer
l
S29 0-255 10ms 10 Flash time
S30 0-255 1 min 0 Inactivity timer on data (cannot be stored)
S32 0-255 ASCII 17 Xon character
S33 0-255 ASCII 19 Xoff character
S91 10-15 dB 15 Adjust transmission level
S92 10-15 dB 15 Adjust transmission level in fax mode
S95 0-255 ASCII 2 Connection messages management
l
3.4.1. SPECIAL S REGISTER DESCRIPTION
ATS9 DETECTION TIME FOR ANWER TONE
0 - 255 100ms Answer tone detection before handshake
Default = 6
ATS10 CARRIER DETECT RESPONSE TIME
0-255 100ms Sets the length of time, in thenths of a seconds, that the
modem waits before hanging up after a loss of carrier.
255 10ms The modem doesn’t disconnect for a loss of carrier
Default = 14
ATS30 INACTIVITY DISCONNECT TIMER
0 The modem doesn’t disconnect as no data is sent or received.
0-255 Sets the length of time, in tens of seconds, that the modem
will stay online before disconnectiong when no data is sent
or received. The timer is inoperative in synchronous mode.
Default = 0 (cannot be stored)