TIZIANO 56 MEMORY
Modem AT Command Set
3.9
\N4
Selects LAPM error corrector mode. Failure to make an LAPM
error-correction connection results in the modem hanging up.
Forces &Q5.
\N5
Selects MNP error corrector mode. Failure to make an MNP error-
correction connection results in the modem hanging up. Forces
&Q5.
Note: Error correction starting from V22 standard
AT\V
MESSAGE COMPOSITION
\V0
Messages are managed over several lines, according to X, W
and S95 commands.
\V0
Messages are managed over a single line, according to V and Q
commands.
3.1.1. MNP10 COMMAND
AT-K
MNP10 SERVICE MANAGEMENT
-K0
Disable MNP10 service. The modem negotiates V42bis only.
l
-K1
Enable MNP10 service using detection phase
-K2
Enable MNP10 service without using detection phase
3.1.2. CELLULAR MODE COMMAND
AT-SEC Select MNP10EC
Enable or disable automatic adjustment of the trasmit power level to
accomodate the signalling requirements of cellular telephone equipment.
AT-SEC=0 Disable MNP 10EC. Transmission level is the one set in S91
register.
NOTE: The default is 1 in case the modem detects the cellular
AT-SEC=1,[tx_lev]
Enable MNP10EC and set trasmit level [tx_lev] 0 to
30 (0dBm to-30dBm)
