manualshive.com logo in svg

digico SD7, Руководство по эксплуатации

Поделиться
Скачать
digico SD7 Скачать руководство пользователя страница 5

SD7 - Getting Started

1-1

1.1 The Console

The Digico SD7 consists of a worksurface with dual redundant audio engines and a range of onboard inputs and outputs. This
can be connected to multiple Input/Output Rack Units by optical fibre and/or MADI links, which carry all the audio input and output
signals.
The console worksurface consists of 3 sections that can be configured to control up to 254 input/output channels, up to 36
VCAs, 128 busses and 32 Matrix Inputs and Outputs.
The left and right sections have 12 assignable faders and 12 sets of assignable on-screen channel controls, the centre section
has 24 assignable faders and 2 pairs of assignable master faders.
The console's buss architecture is dynamic, and can support mono, stereo, LCR, LCRS and 5.1 configurations.
Multiple console setups can provide:
Front of House and Monitoring with shared stage racks and gain tracking.
Remote control of one console from another console or from a laptop computer.

1.2 Manual Overview

This manual provides an overview of the desk, and describes some of the basic operating principles which the user will need to
understand in order to run the desk.

For full details on all SD software functionality please refer to the SD Series Software Reference Manual available for download
at www.digico.biz

The following typographical convention used in this manual: An arrow bracket (>) is used to indicate a sequence of button
pressing. For example, Layout  >  Fader Banks indicates that the
Fader Banks button is accessed by first pressing the Layout  button.

Содержание SD7































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды