manualshive.com logo in svg

digico SD7, Руководство по эксплуатации

Поделиться
Скачать
digico SD7 Скачать руководство пользователя страница 10

SD7 - Getting Started

1-6

1.3.6 Channel Types ......................................................................

The SD7 has 4 different channel types which are laid out in banks of 12 on the console worksurface and can be identified by their
colour.
By default, the Input Channels will be assigned to Layer 1 on the left and right sections of the console.
The output channels (Groups, Auxes and Matrices) will be assigned to Layer 2 and also to the upper centre section.
Control Groups will be assigned to the lower centre section. These bank assignments can be customised by the user and saved
in a session at any time.
Holding any bank or layer button down for a couple of seconds will switch all 3 worksurface sections to the same bank level or
layer.
The controls on each different type of output channel are identical but an input channel has a number of additional features.

Input Module - Touch to Expand 

Analogue Gain/Digital Trim

Phase - Gain Tracking

Main/Alt Input Select

Inputs

Insert A Routing & On/Off

HPF/LPF

4 Band Dynamic EQ

Touch To Expand

Multiband Dynamics

Touch To Expand

Insert B Routing & On/Off

Aux Sends

Touch to Assign Rows

Channel Pan

Mute Indicators

Channel Label

Routing Module - Touch to Expand

Gang & Safe Indicators

Groups

Auxes

Matrix

Содержание SD7































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды