Digi TransPort LR54-AA401, Руководство пользователя

Страница: 34 / 169

Interfaces
TransPort LR User Guide 39
Wi-Fi interfaces
Wi-Fi-enabled TransPort LR devices support up to 4 Wi-Fi interfaces on each of the 2.4 GHz and 5 GHz
frequency bands. Each Wi-Fi interface can be configured as an independent Wi-Fi Access Point with its
own security settings.
Related topics
Configure a Wi-Fi access point on page 39
Configure a Wi-Fi access point with WPA2-Enterprise or WPA-WPA2-Enterprise security on page 41
Show Wi-Fi status and statistics on page 42
Related commands
wifi on page 215
wifi5g on page 216
show wifi on page 202
show wifi5g on page 203
Configure a Wi-Fi access point
This section describes how to configure a Wi-Fi 2.4 GHz Access Point and a Wi-Fi 5 GHz Access Point.
Required configuration items
Configuring a Wi-Fi Access Point involves configuring the following items:
n
Enabling the Wi-Fi Access Point.
n
The Wi-Fi Access Point’s Service Set Identifier (SSID).
You can configure the SSID to use the device's serial number by including %s in the SSID. For
example, an ssid parameter value of LR54_%s resolves to LR54_LR123456 .
n
The password for the Wi-Fi interface. The password only needs to be set if WPA2-Personal or
WPA-WPA2-Personal security is being used.
Additional configuration options
The following additional configuration settings are not typically configured to get an Wi-Fi access
point working, but can be configured as needed:
n
The type of security used on the Wi-Fi interface. The options are as follows. By default, WPA2-
Personal security is used.
l
None : No security is used on the Wi-Fi network.
l
WPA2-Personal : a method of securing a Wi-Fi network using WPA2 with the use of the
optional Pre-Shared Key (PSK) authentication. This security method was designed for
home users without an enterprise authentication server.
l
WPA/WPA2-Personal . This security method is a mixed mode, providing WPA with
Temporal Key Integrity Protocol (TKIP) encryption or WPA2 with Advanced Encryption
Standard (AES) encryption supported by the Access Point.