Digi TransPort LR54-AA401, Руководство пользователя

Страница: 36 / 169

Interfaces
TransPort LR User Guide 41
Configure a Wi-Fi access point with WPA2-Enterprise or WPA-WPA2-Enterprise security
The WPA2-Enterprise and WPA-WPA2-Enterprise security modes allow a Wi-Fi Access Point to
authenticate connecting Wi-Fi clients using a RADIUS server.
When the Wi-Fi Access Point receives an connection request from a Wi-Fi client, it will authenticate
the client with the RADIUS server before allowing the client to connect.
Using Enterprise security modes allows for each Wi-Fi client to have different username and
password which are configured in the RADIUS server and not the TransPort LR device.
Configuring a Wi-Fi Access Point to use an Enterprise security mode involves configuring the following
items:
Required configuration items
Configuring a Wi-Fi Access Point to use an Enterprise security mode involves configuring the following
items:
n
Enabling the Wi-Fi Access Point.
n
The Wi-Fi Access Point’s Service Set Identifier (SSID).
You can configure the SSID to use the device's serial number by including %s in the SSID. For
example, an ssid parameter value of LR54_%s resolves to LR54_LR123456 .
n
Setting the security mode to either WPA2-Enterprise or WPA-WPA2-Enterprise.
n
RADIUS server IP address.
n
RADIUS password.
Additional configuration options
Additional configuration options include:
n
RADIUS server port.
n
A description of the Wi-Fi Access Point.
From the command line
To configure a Wi-Fi 2.4 GHz Access Point, the command-line command is wifi on page 215 .
To configure a Wi-Fi 5 GHz Access Point, the command-line command is wifi5g on page 216 .
The following steps show using the wifi on page 215 command. When configuring a Wi-FI 5 GHz
Access Point, use the wifi5g on page 216 command. The parameters are the same.
1. Enable the Wi-Fi Access Point.
wifi 1 state on
2. Enter the SSID for the Wi-Fi Access Point.
wifi 1 ssid LR54-AP1
3. Enter the security for the Wi-Fi Access Point.
wifi 1 security wpa2-enterprise