Command descriptions
TransPort LR User Guide
175
route
Configures a static route, a manually-configured entry in the routing table.
Syntax
route <1 - 32> <parameter> <value>
Parameters
destination
The destination IP network for the static route.
Value should be an IPv4 address.
mask
The destination IP netmask for the static route.
Value should be an IPv4 address.
gateway
The gateway to use for the static route.
Value should be an IPv4 address.
metric
The metric for the static route. The metric defines the order in which routes should be used if there
are two routes to the same destination. In such a case, the smaller metric is used.
Accepted value is any integer from 0 to 255. The default value is 0.
interface
The name of the interface to which packets are routed.
Accepted values can be one of none, lan1, lan2, lan3, lan4, lan5, lan6, lan7, lan8, lan9, lan10, dsl,
cellular1 or cellular2. The default value is none.
Содержание TransPort LR54-AA401
Страница 1: ...TransPort LR User Guide User Guide ...
Страница 89: ...Upload and download files TransPort LR User Guide 125 config da0 100 254 0 3KB s 00 00 sftp exit ...
Страница 101: ...Command descriptions TransPort LR User Guide 148 cpu Show CPU usage Syntax cpu Parameters ...
Страница 124: ...Command descriptions TransPort LR User Guide 171 pwd Displays the current directory name Syntax pwd Parameters ...
