Digi ShowBox Setup Guide (90000898 Rev. C) – Page 3
Autoplay
To have the ShowBox start playing the
images on your USB flash drive, plug things
in using the order in the diagram above:
1.
Plug the video cable into the
display’s video (VGA) port and the
ShowBox’s video (VGA) port (on
the back of the chassis).
2.
Connect the power supply’s cable
into the back of the ShowBox’s
chassis. Screw the connector on to
avoid it coming out accidentally later.
Do not plug the power supply into
your power source yet.
3.
Plug your USB flash drive into a
USB port on the front of the
ShowBox chassis.
4.
Optionally plug a USB mouse into
the other USB port on the front of
the ShowBox chassis (for manual
slide advance).
5.
Plug the power supply into the power
source. The ShowBox will boot
itself up and automatically begin
playing the graphics image files on
your flash drive.
Configuration/Thumbnail view
To configure the slide playback before
displaying your images, plug things in
using the following order:
1.
Plug the video cable into the
display’s video (VGA) port and the
ShowBox’s video (VGA) port (on
the back of the chassis).
2.
Connect the power supply’s cable
into the back of the ShowBox’s
chassis. Screw the connector on to
avoid it coming out accidentally later.
3.
Plug the power supply into the power
source. The ShowBox will boot
itself up into the Configuration/
Thumbnail view.
4.
Plug the USB flash drive into a USB
port on the front of the ShowBox
chassis.
5.
Plug a USB mouse into the other
USB port on the front of the
ShowBox chassis.
Connection Order for Configuration or Manual Play
