Digi DIGISTROKE, Инструкция по эксплуатации, Страница: 2 / 11

ENGLISH
INSTRUCTION MANUAL
STOPWATCH DIGISTROKE
FEATURES :
300 memories
Lap year display
Stopwatch
Auto start stopwatch
Memory indicator
Calendar and time display
Stroke / Frequency measurement
Memory recall
Solar time stopwatch
Water resistant
Quick Reference Guide :
Stopwatch :
Press (S4) until the display indicator points to Stopwatch.
Standard measurement
- Press (S1) to start Press (S1) again to stop Press (S3) to reset. Accumulated Elapsed Time measurement.
- Press (S1) to start Press (S1) again to stop Press (S1) to restart -- Press (S3) to stop Press (S2)
to reset.
Lap/Split measurement
- Press (S1) to start Press (S3) record (Lap/split 1) Press (S3) record (Lap/Split 2) Press (S1) to stop
Press (S3) to reset.
Viewing records in each race
Press (S2) when the stopwatch is running or stop within each race.
Notes:
1. Memory indicator
When 290 (lap/split) of data have been used. « Full » at the left bottom corner will begin to flash. It indicates there are only 10 memories
left. When 300 (lap/split) of data have been used, « Full » will be displayed and a special sound will be heard. It indicates all memories
have been used up. When memories are used up, no more races can be recorded in memory.
2. Each race consumes some memories for start date and race information, taking more races will reduce the total number of lap/split that
can be recorded.
Auto Start Mode :
Hold (S3) for 2 seconds in Stopwatch mode.
Auto-Start Setting
Press (S3) to turn on the auto-start and minute digits will flash.
Press (S3) to repeatedly select (flashing) digits (Minute Hour).
Press (S1) to set the digits.
Press (S3) to accept the setting.
Notes :
1. Four short beeps and one long beep will be heard before the start time.
2. To turn off and exist the Auto Start Mode, press (S4).