Digi DC-180, Руководство по эксплуатации и обслуживанию

Страница: 17 / 27

17
5.9. Recall Item From Memory:
Version 1.13 and above ID CODE (30 ITEM MEMORY)
OPERATION EXAMPLE : Recall Item From Memory:
Task Procedure
1. Select Scale And Reset Zero Point Press [SCALE 1 , 2 ] Key And Press
[REZERO] Key.
2. Enter ID Code Type ID Code (Up To Four Digits) Example
[1] [2] [3] [4], Then Press[CODE] Key.
3a. Enter Tare Value (One Touch Tare) Place Empty Container On Platter And Press
[TARE] Key.
3b. Enter Tare Value (Digital Tare) Place Full Container On Platter And Keyboard
Enter The Known Tare Weight. (Example
Press: [0] [
•
] [2] [5] [5], Then Press [TARE]
Key.
4. Accumulate Quantity With The First Quantity On Scale, Press [+]
Key. Remove Them And Press [C] Key. The
Display Returns To Weighing Mode . Place
The Second Quantity On Scale And Count
Them. Repeat The Procedure Until All Parts
Have Been Counted. If A Mistake Is Made
During Accumulation, Press [-] Key.
5. End Accumulation Press [
∗
] Key.
! !
! !
Note: If no Unit Weight has been programmed into the memory, it will be necessary to
enter a Unit Weight using one of the following steps:
a
" "
" "
Compute Unit Weight
Place 10 Pieces On Scale, Press [PIECES]
key.
When sample size is insufficient the number of pieces to be added appears in display
This procedure may be skipped by pressing [pieces] key without adding additional pieces,
however it may affect accuracy to use an insufficient sample size
The accuracy of the computation can be improved by increasing the sample size
b
" "
" "
Recompute Unit Weight
Add Additional Pieces, Press[PIECES] Key.
or
c
" " " "
Enter Unit Weight
Press [1] [ • ] [7] [2] [6] [6], Press [UNIT
WEIGHT] key.
DISCONTINUED