About the ConnectCore 6 Plus
Power supply architecture
ConnectCore 6 Plus Hardware Reference Manual
11
Power domain
Min
Max
NVCC_EIM
1.65 V 3.6 V
NVCC_LCD
1.65 V 3.6 V
NVCC_CSI
1.65 V 3.6 V
NVCC_RGMII in HSIC 1.2 V mode
1.15 V 1.30 V
NVCC_RGMII in RGMII 1.5 V mode 1.43 V 1.58 V
NVCC_RGMII in RGMII 1.8 V mode 1.70 V 1.90 V
NVCC_RGMII in RGMII 2.5 V mode 2.25 V 2.625 V
As shown in the table above, the supplies have a wide operating range. In order to provide the most
cost-effective and flexible solution for a given use-case, the supplies listed in the table need to be
provided by the carrier board integrating the ConnectCore 6 Plus module. However, PMIC power
domains 3.3 V—and LDO2/3/4/6/8 options—are dedicated power sources for supplying i.MX6QP power
domains.
The MCU - assist specific power domain (VLDO3_MCA) available on the ConnectCore 6 Plus LGA pads is
a power supply output powering the on-module Kinetis processor.
