www.digisportinternational.com
INSTRUCTION MANUAL
STOPWATCH DTM60EL
FEATURES:
CHRONOGRAPH
- Display of Lap, split and running chronograph.
- Measure up to 9 hours 59 minutes and 59.99 seconds.
- 60 recallable lap and split memories.
- Display of fastest (FS), slowest (SL) and average (AV) lap times for the laps traversed
- Lap counter (00-99)
- Electro-Luminescent back lighted LCD
TIMER:
- Countdown timer, maximum 10hours.
- Automatically recycles upon completion of countdown. And cycle counter to keep track of cycles
counted.
- 30 seconds shuttle-countdown for timeout period timekeeping.
PACER:
- From 10 beeps/minute to 320 beeps/minute.
- Display of pacer frequency, beep counter and total time elapsed simultaneously.
CLOCK:
- Hour, minutes, seconds, month, date, day and year, auto calendar.
- Alarm hour and minutes.
- 12/24 hour and European calendar user option.
CLOCK:
1. Depress D to select CLOCK mode. The alarm hour, alarm minutes, month, date, day, year, hour, minute and seconds are displayed as shown.
2. Time setting can be done by means of depressing B to select digits and A to advance digits
Remarks:
alarm is automatically armed if alarm hour or minute has been set. Alarm can also be armed or disarmed by depressing C at normal time
mode.
When alarm is armed 'AL' is flashing. When the alarm time is reached and the alarm is armed, an output of 3 short beeps/second will sound for 15
seconds.
Remarks
: if the alarm time is reached when the stopwatch is in other modes, the alarm will only sound 3 short beeps.
CHRONOGRAPH OPERATION:
1. Depress D to select the operating mode. The chrono indicator is shown. Depress A to start.
2. Depress B to read the 1st lap time. LAP is shown at the upper row, SPLIT is shown at the middle row and the RUNNING CHRONO is shown at the
bottom row.
3. Depress B to display the 2nd lap time. The 2 digit in dot matrix format at the top left corner is the lap counter.
4. Depress B to display the 3rd lap time.
5. Depress A to stop counting.
RECALL MODE
1. Depress C to recall 1st lap data (memory can be recalled anytime when the chronograph is either running or stopped)
2. Depress C again to recall the 2nd lap data.
3. Depress C again to recall the 3rd lap data.
4. Depress C again to recall the stopped time. At any time during the RECALL mode....
5. Depress A will display the average (AV) Lap time of the Laps traversed.
6. Depress B will display the slowest (SL) Lap time of the laps traversed.
7. Depress B again will display the fastest (FS) Lap time of the laps traversed.
8. Repeated depression of B will display the fastest and slowest Lap times alternately.
Remarks:
(1)
if lap counter is > 99 or either Lap or split is greater than 9 hours 59 min 59.99 sec, the power of the computer has been exceeded and
the AV information will be disabled as shown.
(2)
If either lap of split is greater than 9 hours 59 min 59.99 sec, the power of the computer has been exceeded and the SL and FS information will be
disabled.
9. Another depression of the C button will return the chrono to the stopped status. (Depression of D at any time during recall mode serves the same
purpose.)
10. Depress A to restart counting or B to reset all memories.
Remark:
Since there are only 60 memories the chronograph will recall only the 1st 59 and the last lap data.
11. Depress D to select the TIMER mode.
12. Depress B to select digits and A to set digit.
13. Digits will be advanced by +1 for every depression of A.
14. When the seconds digits are set, depress B to complete the setting process. The upper and middle row will show the same preset time. The 4
digit counter at the lower row will remain at 0000.
COUNTDOWN TIMER:
1. Depress A to start countdown.
2. The timer can be started or stopped by depressing A. When the timer approaches zero, an output of 2 short beeps/seconds will sound for 15
seconds. (push of B, C or D buttons will stop the sound) The counter will advance by 1 and timer starts again immediately.
3. When the timer is at the stopped condition, depress C will immediately start a 30 seconds shuttle countdown (for timeout timekeeping), which is
displayed at the top row. At the end of the 30 seconds a beep will be generated and the displays will return to the original status.
4. Depress C while this countdown is in progress will terminate it immediately and the display return to its original status.
5. Countdown will resume when A is depressed.
Remarks :(1)
if the preset time is 29 seconds, only 2 beeps will sound on approach of zero.
(2)
When timer reaches zero when the stopwatch is in other modes, only 2 beeps will sound. If the game has a 20 minutes period, select the timer
mode and set the countdown time to 20 minutes.
PACER:
1. Depress D to select the PACER mode. The display will be as shown with the last 2 digits at the lower row blinking.
2. At this status depress B will sequence the PACER frequency as follows: 10, 20, 30,40,60,80, and 120,160,240,320.
3. Depress A to start PACER. A beeping sound of 320 beeps/minute will sound. The total time elapsed will be shown on the top row, the beep counter
at the centre and PACER frequency at the lower row. The beep counter has a range of 9999. Depress A to stop PACER.
Remarks:
Pacer will be reset if stopwatch is switched to another mode
