4
PM-000121 Digga Torque Logic Installation Manual
DIRECTIONS
Once the OEM Pin is removed from the drive, remove the Knuckle/Wishbone.
Fasten the drive in a sturdy position and remove the OEM pin out from the top of the drive.
Insert the Digga Torque Logic into the holes of
the bails/ears to align pin placement.
A)
B)
The connector on the Digga Torque
Logic must be facing up and parallel
with the drive. (Use a level to assure
correct placement)
The Digga Torque Logic has a flat spot
on the bottom. Mark the placement of
the flat area as this is where you will need
to secure the pin with a bolt on, or a bar
welded to the bushes/ears. This will keep
the Digga Torque Logic in position with the
drive to ensure accurate torque readings.
C)
1.
2.
