GENERAL INFORMATION
Regular maintenance is the key to long equipment life and safe operation.
Maintenance requirements have been reduced to an absolute minimum. However it
is very important that these maintenance functions be performed as described below.
Never do any maintenance to the planer while it is running.
Exercise the MANDATORY SAFETY SHUTDOWN PROCEDURE
BEFORE working on or around the planer.
DAILY
•
Check to be sure case drain coupler is completely engaged.
•
Check skid-steer hydraulic system to ensure an adequate level of hydraulic oil.
•
Check all hardware and tighten if necessary. See Section "O" for Bolt Torque
Specifications.
•
Check hydraulic system for hydraulic leaks.
•
Check for missing or illegible Safety / Warning Decals.
•
Check picks for freedom of rotation, flat spots and wear. Replace worn or missing
picks or any picks that are not rotating freely or have flat spots.
•
Visually inspect the machine for worn parts or cracked welds and repair as
necessary.
•
Lubricate grease fittings on Wheel pivot pins.
EVERY 40 HOURS
•
Lubricate grease fittings on cylinder ends and front of planer.
Profila Operator’s Manual Maintenance and Service
18
