Digga PR3843, Руководство по установке, эксплуатации и устранению неисправностей, Страница: 19 / 32

DIGGA 7” DISPLAY OPERATING GUIDE
Inclinometer Bull’s Eye Resolution Selector
1. To zero the Bull’s Eye:
Insertion touch anywhere on the
Inclinometer. (Click center bullseye)
2. To set resolution:
Use the arrow keys to set resolution.
Resolution available: (degree
allowance):
3. To set the filter, this is to increase
or decrease the sensitivity of the
bullseye only
N ote :
For angled (battered) piles:
User can select the desired angle of
insertion by centering the green dot
in the Bull’s Eye.
Move prime mover forward or back
until the desired angle is achieved,
as indicated in the upper corner of
the display. Once the angle is
reached, touch the Inclinometer,
Center Bull’s Eye & OK on
pop up .
This will make the chosen angle the
new “center” of the bull’s eye.
19
PM-000 199 September 20 19