Digga PDD-PD50, Руководство по обслуживанию и ремонту

Страница: 47 / 69

47
17. Screw the nut in place (flat
side up) using a chisel and
hammer ensuring the recess
in the nut lines up with locking
tabs previously used 18. Lock the nut by
bending the previously
used tabs into the nut’s
recess 19. Replace the gear set 20. Replace the ring gear.
Use a screw to help guide
it into place.
21. Add oil allowing time fot
it to settle to the bottom 22. Fill Out to 5mm below
locking place 23. Replace motor and
motor bolts lining up the
hoses with the oil bung
CHANGING THE SHAFT SEAL
24. Replace hood and
hood bolts