Dietz AS[01] Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 60

Dietz AS[01] Скачать руководство пользователя страница 23

Sitting down

1.

Release the leg rests and swivel them to the outside.

2.

If possible, place the wheelchair with the rear wheels against a
stable wall.

3.

Lock the wheelchair in place with the two wheel locks.

4.

Move as close to the wheelchair as possible, turn around and care-
fully move backward until your legs touch the edge of the seat.

5.

Now use your hands to grasp the arm rests and use them as sup-
ports.

6.

You can slowly and safely lower yourself into the wheelchair.

7.

Next, you can swivel the two leg rests towards the front in the di-
rection of movement. Make sure that you hear the clicking noise
when the leg rests lock into place.

8.

Use your feet to fold the two two foot rests downward and place
your feet on the foot rests.

Getting up

Proceed in reverse order to get up and out of the wheelchair.

NOTE

To transfer sideways, swivel the
side pieces upward if necessary
(no. 3.8, pg. 20).

04 USING THE WHEELCHAIR

04 USING THE WHEELCHAIR

23

«
...
21
22
23
24
25
...
»

Содержание AS[01]





























































Отзывы:

Нет отзывов