Dietz Rehab AS[01] Скачать руководство пользователя страница 18

Страница: 18 / 68

DIETZ GmbH / User manual adaptive wheelchair AS[01 | AS[01]RF / Version 3.0.0 EN

04 USING THE WHEELCHAIR

4.2 Propelling and slowing down the

wheelchair with the push rims

The wheelchair can be manoeuvred forwards,
rearwards and left to right by using the push rims

on the rear wheels.

To do this, hold the push rims with your

hands and turn the wheel towards the front
or back (Fig. 12). Place your hand on the
push rim with the thumb in the direction of
movement and form a fist enclosing the

push rim.

To slow down, let the push rim glide

through your hand in a controlled manner.

To steer the wheelchair, slow down the

push rim on the side to which the wheel

chair should move or turn.

To turn on the spot, push one hand for-

wards and the other hand backwards at the
same time.

To turn the wheelchair, turn the wheels in

the opposite direction using the push rims.

WARNING

To avoid hand injuries, when the wheelchair is
in motion, do not grip between the spokes or
between the rear wheel and the parking brake.

Fig. 12

WARNING

The handrails can become very hot after

longer braking manoeuvres.

WARNING

When propelling your wheelchair, make sure
that you do not touch the tyre casing with your
thumb.

Risk of trapping between the tyre and side-

guard / armrest!

Содержание AS[01]





































































Результаты поиска

Содержание AS[01]

Отзывы:

Похожие инструкции для AS[01]

Бренды по названию

Популярные бренды

Dietz Rehab AS[01], Руководство пользователя

Результаты поиска

Содержание AS[01]

Отзывы:

Похожие инструкции для AS[01]

Бренды по названию

Популярные бренды