Dieter Knoll Collection DKS38024XK, Руководство пользователя

Страница: 17 / 48

B
C
A
2. Put the second end of the draining
pipe (C) into a container. Put it at a
lower position than the outlet valve (A).
3. Open the oven door and put the
connector (B) into the outlet valve (A).
4. Push the connector again and again
when you empty the water tank.
The tank can have some
water when the display
shows: Water required.
Wait until the water flow
from the water outlet valve
stops.
5. Remove the connector from the valve
when the water stops flowing.
Do not use the drained water to
fill the water tank again.
Heat-up indicator
When you turn on a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
sounds 3 times and the bar flashes and
then disappears.
Fast Heat Up
This function decreases the heat-up time.
Do not put food in the oven
when the Fast heat up function
works.
To turn on the function, hold for 3
seconds. The heat-up indicator alternates.
This function is not available for some
oven functions.
Residual heat
When you turn off the oven, the display
shows the residual heat. You can use the
heat to keep the food warm.
CLOCK FUNCTIONS
Clock functions table
Clock func‐
tion
Application
Minute
Minder
To set a countdown
(max. 2 h 30 min). This
function has no effect
on the operation of the
oven.
Use to turn on the
function. Press
or
to set the minutes
and to start.
Clock func‐
tion
Application
Duration
To set how long the
oven works (max. 23 h
59 min).
End Time
To set the switch-off
time for a heating func‐
tion (max. 23 h 59 min).
If you set the time for a clock function, the
time starts to count down after 5 seconds.
17