Step
10
Clean the glass panels with water
and soap. Dry the glass panels
carefully. Do not clean the glass
panels in the dishwasher.
Step
11
After cleaning, install the glass pan‐
el and the oven door.
The screen-printing zone must face the in‐
ner side of the door. Make sure that after
the installation the surface of the glass pan‐
el frame on the screen-printing zones is not
rough when you touch it.
When installed correctly the door trim
clicks.
Make sure that you install the internal glass
panel in the seats correctly.
A
How to replace: Lamp
WARNING! Risk of electric
shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth
to prevent grease residue from burning on
the lamp.
Before you replace the lamp:
Step 1
Step 2
Step 3
Turn off the oven. Wait until
the oven is cold.
Disconnect the oven from
the mains.
Put a cloth on the bottom of
the cavity.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
TROUBLESHOOTING
WARNING! Refer to Safety
chapters.
What to do if...
In any cases not included in this table
please contact with an Authorised Service
Centre.
47
Содержание DKB65902XK
Страница 1: ...DKB65902XK Benutzerin formation Backofen User Manual Oven ...
Страница 50: ......
Страница 51: ......
Страница 52: ...867368883 A 432021 ...