Diesse VES-MATIC CUBE 30, Инструкция по эксплуатации, Страница: 29 / 50

Instructions Manual
Rev 2.0 of 02/2016 29/50
1. Open the lid of VES-MATIC CUBE 30.
2. Access Setup/User/Recharge_Cd from the menu.
3.
You will be asked to insert the “Check Device
Transponder RF” into the dedicated port (as shown
in the figure 3.6.9).
4. Press OK.
5. At this point, the instrument will show a message
that reloading is complete and the test counter will
increase.
Fig. 3.6.9
It is advisable
to recharge the check device counter when its functionality is not fully exhausted i.e.
when at least sixty executable tests remain.