CMi4160
– LoRaWAN
®
Module
7
02/2021
Figure 2: Soft start LED indication
5.3.6
SWITCH OFF/REBOOT MODULE
To reboot the module, press and hold the push button (2) for 5-15 seconds. Release the button when
the green LED is lit.
To switch off the module, press and hold the push button (2) for 15-20 seconds. Release the button
when the red LED is lit.
Figure 3: Reboot/switch off module
6
ADMINISTRATION REFERENCE
6.1
PURPOSE
This chapter contains detailed information about configuring options and the different message
formats of CMi4160.
6.2
SECURITY AND ACCESS CONTROL
CMi4160 has a configuration lock feature, which prevents unauthorized access to the module. When
configuration lock has been enabled, a Product Access Key will be needed to access the device. For
more information about security and access control for CMi4160, please refer to the One-touch
commissioning (OTC) documentation, available on the Diehl Metering website.
6.3
CONFIGURATION OPTIONS
CMi4160 is configured via the Elvaco OTC App. It uses NFC to transfer settings to the module.
Downlink may also be used for some applications, see section 6.8. Downlink for more information.
Please note that the Elvaco OTC app is only compatible with Android™ phones with
Android™ 5.0 or later.
