Diehl Metering Hydrus DN 15 Series, Руководство по установке

Страница: 9 / 20

-9-
The data generated by the meter can be viewed in the display loop with
system information (e.g. flow rate, volume, date, due date, medium tem
-
perature). The loops are numbered from 01 to 09.
The optical button located on the front panel enables scrolling the display
loops.
To save battery lifetime, the meter switches automatically to power save
mode after 4 minutes of inactivity. The display is awakened again by
pressing the optical button.
After awakening, the display shows first a screen check (i.e. all symbols
in the display are briefly switched on and off) and then the total volume.
This remains for at least 10 seconds on the display (also when the optical
button is pressed). Afterwards the display loop can be switched with the
help of the optical button.
Forward
flow
Backwards
flow
Loop
number
Leakage
Calibration modi
-
fication
Radio on
Battery
Error / Alarm
Billing value
Cubic meter per
hour
Cubic foot per
hour
(Imperial)
gallon
Kiloliter per
hour
(Imperial) gallon per
minute
Display loop
1 Displaytest 6 Error / Alarms
2 Total volume 7 High resolution total volume
3 Battery lifetime 8 Due date / Due date volume
4
Firmware version / Checksum
9 Reserve volume
5
Current flow
HYDRUS
Deutsch
English
Français Español Português