1
1
Manufacturer’s declaration and approval
General authorization
This device complies with the requirements of the directive 2014/30/EC
with regard to “Electromagnetic Compatibility” and 2014/35/EC "Low Volt-
age Directive" and RoHS directive 2011/65/EU.
Therefore, you will find the CE mark on the device or packaging.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-
struction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his expense.
Modifications not authorized by the manufacturer may void users’ authority to operate this device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference, in-
cluding interference that may cause undesired operation.
CAN ICES-3 (A)/NMB-3 (A)
Tested safety
The Display D1101, Display D1101 /pc-touch has been awarded
the cTUVus symbol.
User information
Repair work on the devices should only be carried out by authorized and
specially trained personnel. Improper repairs will lead to the loss of any
guarantee and liability claims.
Extension boards with electrostatically endangered components can be
identified with this label.
Copyright © 2020, Diebold Nixdorf
01750342842C
1-1
