![DIEBOLD NIXDORF BEETLE M1350 Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/diebold-nixdorf/beetle-m1350/beetle-m1350_operators-manual_2495499019.webp)
5
5
Connecting/Disconnecting Cables
Connecting cables
The installation of the system should be performed in the following order:
•
Plug all data communication cables and fix them.
•
Connect the power supply unit via a DC cable with the BEETLE M1350.
•
Connect the power cord of the power supply unit with the surge protector sockets of the housing in-
stallation.
Disconnecting cables
Never unplug a cable by pulling on the cable; always take direct hold of the plug itself. Follow the proce-
dure below when disconnecting cables:
•
Turn off all power and equipment switches.
•
Remove the cable cover.
•
Unplug all power plugs from the grounded-contact power sockets.
•
Unplug all data communication cables from the sockets of the data networks.
•
Unplug all cables from the devices.
NOTE
Never connect data cables when the system is switched on.
Figure 5-1:
USB-C connector
•
Manually tighten or loosen the knurled thumb
screw of the USB-C connector.
Copyright © 2022, Diebold Nixdorf
01750349439 B
5-1