DIEBOLD NIXDORF BEETLE /iSCAN EASY Non Cash, Руководство по установке, Страница: 26 / 50

Installing the Security Scale
BEETLE /iSCAN EASY Non Cash 22
Installing the Security Scale
Ambient conditions

The weighing plate and the scale’s mechanisms should have no mechanical contact to other
objects (should not touch other objects such as coats, bags, advertising banners, etc.).

Avoid locations where strong vibrations can occur that could prevent of a stable weight (such
as subways, bus stations, etc.).

In such cases, tests with various parameters can be carried out on-site.

Special parameter programs are available for this purpose (please contact Diebold Nixdorf
Service).

Wind and air currents can also cause false values (the scale may not be located within the
direct influence of an air conditioning system or in a drafty location). This is easy to test using
a lighter.

If these conditions cannot be avoided, parameters can be adjusted here as well.

No advertising banners or other foreign objects may be attached to the scale.

In individual cases, the plexiglass frame around the scale can function as a sail and lead to
strong deviations.

Recommendation: Before installation, check conditions on-site and reduce these influences
through the corresponding measures.
Requirements

The floor must be level and sufficiently weight-bearing.

The scale/self-checkout should not wobble or tilt.

The scale does not need to be absolutely level; it can have an incline of up to a maximum of
3°.

The adjustment screws on the feet are limited in the distance they can travel (max. 5 mm
hub) and are only suitable to a certain degree for orienting the scale.