DIEBOLD NIXDORF BEETLE/iSCAN EASY eXpress+, Руководство по интеграции, Страница: 31 / 45

BEETLE /iSCAN EASY eXpress
+
Integration Guide
27
2. Insert the two safety plates from the
inside as shown in the diagram along-
side [1] and secure each of these
from the outside using two M6x10
cheese head screws [2].
3. First place the scale on the angle
brackets without load plate and push
these to the rear until the shoulder
screw on the right side submerges
into the key contour [1]. Now pull the
scale forward again right up to the
key contour [2]. The scale is now se-
cured from falling down during the
further course of installation.
View from below.
4. Finally, screw in four M5x10 cheese
head screws from below into the se-
curity scale.
View from below.
1
1
2
2
2
2
1
2
1
2