Installation to a stand
9.3.2
9.3.2
Preparing the system
1
1
1
1
1.
Place a piece of protection sheet on a flat
surface e.g. a table.
2.
Lay the display face down on the protection
sheet.
3.
Remove the 4 screws (1) that come with the
Beetle A Series.
9.3.3
9.3.3
Installing system to the stand
1.
Fit the system on the stand while holding it in
place.
1
1
1
1
2.
Tighten the 4 M4x6 countersunk screws (1)
(that came with the stand) to secure the sys-
tem to the stand.
Copyright © 2021, Diebold Nixdorf
01750342843C
9-13
