DIEBOLD NIXDORF BEETLE A Series Скачать руководство пользователя страница 30

Страница: 30 / 111

Planning the Installation

8.4

Installation site requirements

8.4.1

Desktop version

When selecting the installation site, ensure that:

•

The area is flat leveled.

•

The system to be installed on a table surface and not on a floor.

8.4.2

Wall mount version

•

To reduce the risk that someone may accidentally walk into the system, location such as walkway ar-
eas, hallways areas or crowded areas are not recommended.

•

Make sure that all applicable building and electric codes and accessibility requirements are followed.

•

The mounting area must have adequate viewing area and ventilation, as well as access to an AC
power outlet.

•

The mounting method must be able to support the combined weight of the system and the sus-
pended weight of all cables attached to the system.

•

The system must be mounted to a solid concrete or brick wall with flat smooth surface.

8-8

Содержание BEETLE A Series





































































































Результаты поиска

Содержание BEETLE A Series

Отзывы:

Бренды по названию

Популярные бренды

DIEBOLD NIXDORF BEETLE A Series, Руководство пользователя

Результаты поиска

Содержание BEETLE A Series

Отзывы:

Бренды по названию

Популярные бренды