Operation
5.4.2.1
5.4.2.1
Customzing the key-operated lock
NOTE
- Read this section carefully before customizing the lock.
- Customize the lock with the safe door open. To open the safe door, refer to the descrip-
tions in the respective sections ("Opening/closing the safe door (with factory setting)" or
"Opening/closing the safe door (with customized lock)"), depending on the installation
status.
- Never force the lock or key.
- Always keep your keys in a safe place.
- If you lose or misplace a key, always change the lock to fit a new key immediately, even
if the original key (the previous key) is recovered.
Customization process
• Open the safe door and close the bolt work (by turning the locking/release lever to the right as far as
possible).
• With the safe door open, turn the valid key counterclockwise as far as possible (closing).
• Remove the key.
NOTE
The position of the service opening on the inside of the safe door depends on the safe
type used. The illustration shows possible locations (1) or (2) of the sealing plug or the
flap.
Copyright © 2020, Diebold Nixdorf
01750334554C
5-17
