© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 20200430
Page 07.045.19
Technical Manual
DICTAMAT OpenDo
8. Error Indication
Error
Description
Code*
Unknown error
There is an unknown cause of
error.
1
Self-test - Multiple errors
The self-test has detected
several errors.
2
Self-test - Oscillator error
Defective oscillator
4
Self-test - Relay defective
Defective relay
5
Self-test - Driver defective Defective driver
6
Self-test - Current
measurement defective
Current measurement does
not function properly.
7
Self-test - Driver error
detection defective
The performance driver
no longer issues an error
message.
8
Hardware - Encoder error The encoder is not correctly
connected or defective.
9
Hardware - Voltage not
permissible
The supply voltage is outside
the permissible range.
10
Memory - RAM defective A defect in the RAM was
detected.
11
Memory - ROM defective The program memory was
changed or is defective.
12
Memory - EEPROM
defective
The data memory is defective.
13
*The red and green LEDs indicate the respective detected error. First the red
LED flashes quickly, then it is permanently lit for approx. 20 s. The green LED
flashes according to the error code. The cycle is repeated until the error is
reset.
4 s
20 s
Example for error code 4
In case of a defect, please always contact our technical support, if
possible with information about the code.
