Dickey-John PM300E, Руководство пользователя

Страница: 21 / 49

OPERATOR’S MANUAL
PM300E and PM332E Planter Monitors
11001-1423-200710
MAIN MENU SCREEN / 19
MANUAL GROUND SPEED CONSTANT ENTRY
NOTE: To verify that the correct
calibration number has been
obtained, move to the Speed
Area Mode screen. Verify that
the speed matches the
vehicle’s speedometer or
remeasure the 122 meter
distance.
A manual ground speed value should only be entered when the ground
speed sensor or tractor radar has failed and no ground speed input is
available.
IMPORTANT: Entering a manual ground speed value when the ground
speed sensor or tractor radar is working properly and
connected to the monitor will interfere with the proper
operation of the planter monitor.
To Enter a Manual Ground Speed Value:
1. Press the Enter key to display the Main Menu screen.
2. Use the Down Arrow key to highlight the manual ground speed value.
3. Press the Enter key to modify the constant.
4. Use the Arrow keys to select digits, increment, and decrement values.
5. Select the Enter key to accept the new number.
6. Once the new values have been entered, press the Escape key to
return to the Main Operate screen.
Any non-zero value will activate manual ground speed. Set manual ground
speed to zero to disable.
To verify that the correct calibration number has been obtained, move to the
Speed Area Mode screen.
1. At the Menu screen, select the Speed Area Mode icon and press
Enter to display the Speed Area Mode screen.
2. Verify that the speed matches the vehicle’s speedometer or
re-measure the 122 meter distance.
Figure 10
Speed Area Mode Screen
HELP CARD
The help card ( Figure 11 ) can be cut out to provide a compact reference for
definitions, set-up screens, and general operating information.
1 2
3
4
1
0,0
0,0
2
0,00
1 2
0,00
0,00
0,0
Field Area 1
Field Area 2
Total Area
Distance
Reset
Counter
Stop
Start
Speed Area Mode icon