OPERATOR’S MANUAL
ISO
6
Version 4 Quick Start Guide
SENSORS
/ 35
6011662 Rev B
ROW SENSORS
A setup wizard provides steps to assign sensors to modules
and operations.
TO ASSIGN SENSORS:
1. Press the
SENSORS
button.
2. Set Sensors to Enabled.
3. Press the
SETUP
button.
4. Take note of the Module type to ensure the right amount of
sensors are entered for that module.
5. Press the
ADD
button to display a new sensor row input bar.
6. Enter the number of sensors assigned to the module shown.
7. Enter the row type as population or blockage.
8. Enter the operation assigned to the sensors.
9. Repeat steps 3-8 until all sensors on that module
are assigned.
10. Press the
NEXT MODULE
button to display the next
module screen.
-
Press the
PREV MODULE
button to return to
previous screen (Figure 26).
