OPERATOR’S MANUAL
32 /
GEOMETRY
ISO
6
Version 4 Quick Start Guide
6011662 Rev B
GEOMETRY
Physical layout of the implement is required to determine the
position of a channel in the field. Configuring an implement
identifies the implement type, area the implement covers, and
any implement offset. Exact distances are required for physical
layout of the implement.
The physical layout of planter center is calculated by measuring
the distance from the implement pivot point to the hitch pivot
point connection.
TIP: Position of coordinates to the hitch/GPS receiver point
determines if the number is entered as positive or negative.
TO ENTER X/Y COORDINATES:
1. Press the
GEOMETRY
button.
2. At the Geometry screen, press the
GEOMETRY
SETUP
button.
-
The tractor/implement illustration on the Geometry
screen (Figure 22) is a visual indicator of
channel/implement layout once dimensions are entered
at the Geometry Setup screen.
Figure 24
Geometry Setup Screen
3. At the Geometry Setup screen, select the implement type
used that matches the equipment.
