Dickey-John Instalab 700 NIR, Руководство оператора, Страница: 52 / 111

OPERATOR’S MANUAL
Instalab 700 NIR Product Analyzer
11001-1574-201107
48 SYSTEM SETUP
RECOMMENDED PRINTER SETUP
The below table provides recommended printer settings based on printer
type. These are only recommendations and can be modified as needed.
RESULTS SETTINGS
A Sample ID and Customer ID can be enabled so that a sample is identified
and saved with this information each time a test is performed. These
functions can be set to automatically populate or require a manual entry for
each test.
To edit Test Result Settings:
1. At the System Setup screen, press the Results Settings button.
2. Enable the check box of desired ID’s required when running samples.
3. Press the
Enter button to accept.
Sample ID
Requires a Sample ID to be associated with each test and prints to ticket.
NOTE: If a minus/dash (-) symbol is
used before a numeric digit, the
auto sequence sample ID will
auto sequence to the next
lower number (ABC-123 will
auto advance to ABC-122). A
dash (-) symbol used within
alpha characters will not affect
auto sequencing.
Auto Sequence Sample ID
Automatic number sequencing to the next higher number will occur with
additional tests of the same sample eliminating the need to manually enter
the ID. A sample ID of ABC123 will auto advance to ABC124.
Customer ID
Requires a Customer ID to be associated with each test and prints to ticket.
Use Last Entered Customer ID
Continues to use the last entered Customer ID with each test unless
manually changed or a power cycle occurs.
PRINTER CABLE
PRINTER TYPE
BAUD
RATE
DATA
BITS
PARITY STOP FORMAT
Star SP712 USB USB (A-B)
Star USB PRN80
Star SP712 RS232 Straight*
RS232 9600
8
None 1 PRN80
SP200 RS232 Straight*
RS232 9600
8
None 1 SP200 +
Dj Thermal RS232
(older unit) Straight*
RS232 1200
8
None 1 SP200 +
* RS232 straight as
opposed to null
+ Limited language
capability