OPERATOR’S MANUAL
IntelliAg MVT
11001-1643A-201411
58 / CONTROL CHANNEL SETUP
NUMBER (#) OF SEED ROWS
Enter number of seed rows assigned to a control channel. Row
assignment is given a priority based on the channel and will be assigned
sequentially thereafter. Channel 1 will always be assigned to the first set of
rows, Channel 2 the next set of rows, and so on. This will disable the row
alarms when a respective channel is turned off.
CHANNEL WIDTH
Granular Seeding
Enter the implement width for rows assigned to a channel.
Granular Fertilizer
Enter the fertilizer spread width assigned to a channel.
FLUSH ENABLE
Flush Enable is a manual override mode that opens the valve and
dispenses granular fertilizer, granular seed, or liquid material for a period of
time in relation to a user-defined flush speed. The Flush Enable feature can
only be activated when the tractor is stopped.
To activate Flush Enable:
1. Change Flush Disable to Enable. Flush Enable must be activated
before the Flush Ground Speed feature displays on the Ground Speed
Setup screen.
2. A Flush Ground Speed greater than 0 must be entered on the Ground
Speed setup screen for this feature to operate.
PRECHARGE TIME
A specified length of time a control channel operates or is active with a
minimum Precharge ground speed greater than 0. (Refer to the Ground
Speed Setup section for Precharge Ground Speed Setup information). This
feature will activate the control when the master switch is turned ON even
without ground speed.
NOTE:
The master switch must be ON
to activate the Precharge
feature.
The Precharge feature is typically used in applications that have significant
distance between the implement row unit and storage bulk tank where seed
placement takes several seconds due to the travel time of the seed/fertilizer
from the bulk tank to the ground.
A Precharge alarm will display any time the Preset feature is established or
changed and the master switch is turned ON.
IMPORTANT: A Precharge number MUST be entered as a positive
number (5.0 seconds) for the system to identify between
a Precharge or Delay Time state.
To activate Precharge:
1. At the Control Channel screen, enter a Precharge time. A Precharge
Time must be entered before the Precharge Ground Speed feature
displays on the Ground Speed Setup screen (Refer to Ground Speed
Setup section).
Nitro Software, Inc.
100 Portable Document Lane
Wonderland
Page 63
