Dibo SBH-E, Руководство пользователя

Страница: 120 / 186

SBH-E : REV A DiBO n.v. 120
4.8. Service components
Machine serves:
Some of the basic components the SBH-E has been made up with, are intended for the operation of the ma-
FKLQH7KHRSHUDWLRQRIWKHPDFKLQHPRGL¿HVDFFRUGLQJWRWKHFKRVHQVHWWLQJVVR\RXZLOOEHDEOHWRDGMXVWDQG
VHWWKHPDFKLQHDFFRUGLQJWR\RXURZQQHHGV7KHFRQWUROGHYLFHVDUHGHVFULEHGKHUHDIWHUDQG\RXFDQ¿QGWKHLU
IXQFWLRQLQJIXUWKHULQWKLVPDQXDO&RQWUROGHYLFHVZKLFKDUHQRWGHVFULEHGVXFKDVYDOYHVFDQQRWEHPRGL¿HG
with regard to their settings. The major settings of the machine can be reduced to three groups:
* Adjustment of the addition of chemicals/additives
* Remote machine operation
* Operation and protection of the SBH-E basis
Metering pumps:
)RUVRPHZDVKLQJSURJUDPPHVFKHPLFDOVDGGLWLYHVFDQEHXVHG7KDQNVWRVSHFL¿FPHWHULQJSXP(
can control accurately the added quantity of additives within the high pressure piping.
According to the chosen SBH-E type, in combination with the matching MPR (CS), the number of additive selec-
tions through the machine operation can be different. For each additive that can be incorporated, a separate
metering pump has been installed on the SBH-E. Since all metering pumps can be operated individually, the
additives can be adjusted and disconnected separately on the machine. The metering pumps are situated inside
the machine basis against the rear, as pictured in paragraph 3.2. The SBH-E has three metering pumps:
* Metering pump 1: addition of wax
* Metering pump 2: addition of shampoo
* Optional pump: addition of other additives (e.g. insect cleaner, grease remover,...)
Electricity box:
The drive mechanism, composed by DiBO, is situated in the SBH-E electricity boxes: switching relays, fuses and
other necessary electrical elements. The composition of the drives may be different, depending on the chosen
type. The SBH-E basis contains more electricity boxes:
* The exterior box, which is the same for the whole SBH-E range, principally contains electrical components
for the machine basis such as the boiler and the high pressure pump.
2QWKHLQVLGHRIWKHIURQWSDQHO\RXFDQ¿QGWKHPRUHVSHFL¿FGULYHFRPSRQHQWVVXFKDVWKHGULYLQJYROWDJH
transformer, timers, metering pump driving, etc.
*In option, there can be an additional drive box next to the metering pumps.
This box is dependent on the coin selector (CS), which drives the SBH-E.
According to the construction of these boxes it is important to know the location of the main components, partic-
XODUO\WKHDXWRPDWLFSURWHFWLRQV\VWHPVIXVHV(DFKLPSRUWDQWHOHFWULFDOFRPSRQHQWKDVDVSHFL¿FQXPEHUFRU
-
responding to the references in the manual. The table on the next page contains a summary of these numbers:
Code Component Description
S2 On/Off Switch Main switch SBH-E
S4 Rotary switch, 3 positions Selector switch ‘menu’ on remote control
S5 Key switch Switching on/off the remote control (no coin selector)
H1 Pilot light Pilot light on the remote control (no coin selector)
S1-8 Push switches Push buttons ‘menu’ on the SMW control
F1 Fuse/automatic circuit breaker Protection of the heating element in the boiler
F2 Fuse N.A. (not applicable)
F3 Fuse/automatic circuit breaker Protection of the driving voltage transformer
F4 Fuse Protection of the 24V drive circuit
K1 Relay Switching of the main motor
K2 Relay Switching of the heating element in the boiler
K3 Relay Switching of the metering pump for shampoo
K4 Relay Switching of the metering pump for wax
Using 2 metering pumps
K5
Timer
Using devices with an extra metering pump
K5
Relay Switching of the extra metering pump (insect cleaner)
K6 Timer
T1 Transformer Power transformer for driving voltage in 24 VAC
Q1 Protection of power Thermal protection contact breaker HP pump/motor
X1 Terminal series 1 Relating to the main feeder
X2 Terminal series 2 Relating to the component feeding
X3 Terminal series 3 Relating to the operation