11
12
●
Scheduling setting
Product Operation
Please use the remote control to set the scheduling. Once successfully scheduled, the
vacuum will clean at a certain time every day.
Before setting the time, make sure the START button is green. If the vacuum is in
standby mode, press the START button to wake it up first.
Set the clock time
Press the CLOCK button, and the
left 00 of the 00:00 will flash.
After finishing the setting, press
the CLOCK button to save the
setting.
Press the to set the hour and
minute, press the to change
between the hour and minute.
Product Operation
Set the scheduling time
Cancel the scheduling
●
Set the scheduling time as”00:00” and save the setting, the previous scheduling
will be canceled.
●
When setting the clock and scheduling time, there will be beep tone. If you don’t
hear a tone, the setting may be unsuccessful.
●
When replacing a new remote control battery, you need to reset the time as
showed above.
Press the PLAN button and the
left 00 of the 00:00 will flash.
After finishing the setting, press
the PLAN button to save the
setting.
Press the to set the hour and
minute, press the to change
between the hour and minute.
