Diamondback APEX Ic8, Руководство пользователя

Страница: 10 / 40

8
ASSEMBLY INSTRUCTIONS
• Unpack the APEX Ic8 from the carton.
• Verify the carton contains all parts from the list.
• Install the front stabilizer (D) by removing the Two 2 bolts (D-2)
from the Stabilizer (D), then posi on in place on the frame (F) and
reinstall the two 2 bolts (D-2) and ghten into place.
• Install the rear stabilizer (C) by removing the Two 2 bolts (C-3)
from the Stabilizer (C), then posi on on the frame (F) and reinstall
the two 2 bolts (C-3) and ghten into place.
• Install the saddle (K) onto the seat post and ghten with the
included wrench.
• Install the pedals (F29-L & F29-R) onto the cranks by threading
the le pedal by hand (marked with an “L”) into the le crank
with a
counter-clockwise rota on
. Do not cross-thread the
cranks/pedals. The pedal must be ght and installed completely
to prevent damage to the cranks.
• Repeat the pedal installa on steps for the right side, no ng
that the pedal will thread into the right crank with a
clockwise
rota on.