Diamond3 MX11, Руководство по эксплуатации

Страница: 7 / 20

HAND MIXER MX11
GB
19
WORKING WITH THE MIXER
l
Use whisks recommended by the
manufacturer only.
Maximum diameter:
Ø 160mm
l
The whisk that is supplied with the
mixer is suited for the following
materials:
Building compounds such as
adhesives, paste, glue, knifing filler,
plaster, tile cement etc.
l
Increase the speed during the mixing
process. Immerse the whisk through
the material until it is thoroughly mixed.
Follow the processing instructions from
the supplier.
Hold the mixer with both hands
during mixing.
l
Do not reach into the rotating
whisk.
MAINTENANCE
Prior to any maintenance or
cleaning work:
- Turn the mixer OFF.
- Wait for the whisk to come
to a complete stop.
- Pull the power plug.
l
Use original spare parts only.
The use of other parts may lead to
damage or injury.
l
More complicated repairs should be
done by the manufacturer or an
authorized service center.
l
Store unused machines in a locked dry
place and out of reach of children.
For continued smooth operation
follow the maintenance instructions:
l
Ventilation slots should be kept open
and clean.
l
Remove dust and dirt using a cloth or a
soft brush.
l
Do not clean the machine with running
water or highpressure cleaners.
l
Do not use solvents for the synthetic
parts (petrol, alcohol, etc.) as these can
damage the synthetic parts.
l
Clean the whisk.
l
The mixer is equipped with carbon
brushes. Have the carbon brushes be
replaced by the customer service if
they are worn.
Regularly check the whisk for
damages for your own safety.
Immediately replace any damaged
whisks.
Regularly check the spindle for
damages.
A mixer with a damaged spindle should
no longer be used. Have it repaired at an
authorized service center.
STORAGE
Pull out power plug
l
Store unused equipment in a dry,
locked place out of the reach of
children.
l
Thoroughly clean the machine.
!