Diamond MCR-120P/N, Руководство по эксплуатации и обслуживанию

Страница: 13 / 14

23
7.7 - Lubrication
Periodically grease gears "2".
- Unplug the machine from its power source
- Take off the protective casing "1"
- Grease the gears using a brush
- Reassemble the casing and fasten the screws
The oil in the transmission reduction gears is long-life and
does not need to be ever replaced
7.9 - Replacing parts
- If you require spare parts contact the manufacturer. Do not use non-original parts.
We would like to remind you that these parts must be replaced and mounted by
specialised staff.
Directive 2002/95/EC, 2002/96/EC and 2003/108/EC on the restriction of the use
of certain hazardous substances in electrical and electronic equipment, and
waste electrical and electronic equipment
This symbol, crossed out wheelie bin, on the product or on its
packaging indicates that this product must not be disposed of with
your other household waste.
Separate waste collection of this appliance is organised and managed by the
manufacturer. It is the user’s responsibility to contact the manufacturer and follow the
waste treatment system the manufacturer has adopted for separate waste collection.
The separate collection and recycling of your waste equipment at the time of disposal
will help to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment.
7.8 - WEEE Waste of Electric and Electronic Equipment
2
1
Fig. 7.7.1
22
With the appliance running:
- check efficiency of all protections and safety features. When the grille is raised the
appliance must automatically stop.
- General functional check.
- Repeated tests to make sure the appliance works correctly for its use.
7.4 - Checks and tests to be carried out when installing
To make sure the appliance has not been damaged when delivered or when being in-
stalled, carry out the following tests;
Before setting to work:
- check that the power supply tension corresponds to the value given on the ID plate
- Check that there are all the warning and ID plates and that they are not damaged
- Check that the power supply cable is not damaged and is intact
- Check that the safety features such as the magnetic sensors are intact and not damaged
Functional checks with the appliance running:
- check the efficiency of the protections and safety features. There is the possibility
that during transport these have been damaged or are out of adjustment
- Carry out several functional tests using pieces of food that are the same size that will
be used in normal working conditions.
7.5 - Periodical controls
To maintain reliability and performance in time, as well as proceeding as indicated, it
is necessary to carry out regular tests and checks as follows:
Before each work shift :
- every day check safety features and protections work correctly.
- check the power cable is intact.
the end of the work shift:
- carefully clean the appliance removing any traces of food
- remove, clean and mount rotor and blades
7.6 - Cleaning the appliance
At the end of the work shift the appliance must be carefully cleaned and disinfected.
- stop the appliance and switch the on/off switch to “0” and remove the power plug.
- With a sponge soaked with water and suitable neutral degreasers (non-toxic)
remove and clean any traces of food.
Do not use petrol, solvents or other inflammable liquids such as detergents. Use
authorised non-toxic and non-inflammable solvents.
Take suitable precautions when cleaning considering the products being used. Always
follow the instructions for use given.
ATTENTION!
These mixers are designed for mixing meat, therefore for health reasons you are
obliged to use non-toxic and neutral detergents. For hygiene purposes such deter-
gents must be suitable for cleaning components that come in contact with food.