Powering
Changing the battery
Changing the standard 9V battery first requires the removal of the four back corner
screws of the pedal. The battery clip is attached to the inside of the back plate - gently
pull the back plate off so as not to strain the connecting wires between the battery clip
and main circuit board. After replacing the battery, carefully place any slack in the con-
necting wires into the box cavity, and replace the back plate with the four screws, taking
care not to pinch the connecting wires.
Using a 9V adapter
Any standard 9V DC negative pin AC adapter for effect pedals can be used to power the
Diamond Drive. The insertion of the AC adapter plug automatically removes the internal
battery from the circuit.
Warranty
Diamond Pedals carry a full five year warranty on registered products - make sure to
send us your warranty card! The warranty is simple - if you have a problem, call us,
send us the pedal if necessary, and we’ll make it right.
3
